Mitsubishi Electric CAHV-R450YA-HPB Installation & Operation Manual page 66

5
Unit1
Power Save
Schedule
Fan Mode
Anti-freeze
F1 F2
<7> Function setting
Function description
Sets the functions for each connected unit from the remote controller as required.
• Refer to the Installation Manual for the connected units for details on the connected unit settings at shipment, Function No. and the Data.
• If the function settings change the connected unit functions, all the settings must be managed appropriately, such as by writing them down
on paper.
Button operation
1
Unit1
Service
F1 F2
2
Unit1
Password input
Press +/- to set password
F1 F2
3
Unit1
Unit initial set
Check
Contact name
Contact number
Password protection
F1 F2
In the Operation setting screen, press the [F1] button to move the cursor to
FRI
Power Save.
Yes
Press the [F3] button to select "Yes".
No
Normal
No
Next
F3 F4
Select "Service" from the Main menu, and press the [Select] button.
FRI
F3 F4
A password input screen will be displayed.
FRI
Enter the current maintenance password (a 4-digit number).
After entering the 4-digit password, press the [Select] button.
If the password is correct, the Service menu will be displayed.
F3 F4
Select "Unit initial set" from the Service menu, and press the [Select] button.
FRI
F3 F4
66