Advertisement
3.5.3) Remove handle bolt.
3.5.4) Put the arm into knob (3) and turn clockwise until they no longer turn.
If the bolts are tight, it cannot be lifted.
3.5.5) Put the arm (1) into the joint (4) of bottle jack and swing the arm up and down to lift up the table. If
the screw (2) is loosened slightly, the down speed is slow.If the screw is loosened a lot, the down speed is
fast.
4
If the handle bolt does not turn, reduce the load by moving the arm
up and down(1) or counterclockwise(2).
Loosening the hand bolt may cause the table to be lowered sharply.
3
1
2
Advertisement
