Table of Contents
Advertisement
1.
Safety information
1.1. Signal glossary
•
Failure to observe the safety instructions in this manual implies various risks and
endangerment of life and the physical condition of the operator. The notices are marked
with the following signal words:
•
Failure to observe the safety instructions in this manual, which does not cause injuries
but destruction of the system and its operability, are marked with the following signal
word:
The above signal words can be combined with the safety symbols or the warning symbols.
General danger
Danger caused by electricity
Danger for the environment
1.2. Dangers of maloperation
The CCS 5 underwent a safety inspection. The integrated electric and hydraulic safety
elements ensure safe operation if the device is used as it is intended.
In cases of maloperation or abuse, as well as in cases of ignoring the application limits and
safety regulations, the following threats can occur regarding the:
•
Life or physical condition of the operator;
•
The CCS 5 device, as well as connected machines and systems;
•
The accuracy of measurements made by the CCS 5;
•
The environment.
Therefore, it is necessary that everybody having to do with the operation and the
maintenance of the unit strictly follows this instruction manual!
Instruction manual CCS 5, 15/ 10/ 2021
DANGER implies a dangerous situation which causes death or serious
injuries in case of nonobservance.
WARNING implies a dangerous situation which can cause death or
serious injuries in case of nonobservance.
CAUTION implies, together with the danger symbol, a dangerous
situation which can cause light, medium, or heavy injuries in case of
nonobservance.
NOTICE describes the correct way of handling the device.
4
Advertisement
Table of Contents
