Cleaning The Burner - Miele KM 3010 Operating And Installation Instructions

Cleaning and care

Cleaning the burner

Do not clean any parts of the burner
in a dishwasher.
The surface of the burner cap will be-
come more matte with time. This is
quite normal and does not indicate
damage to the burner cap.
 The burner should be dismantled and
then cleaned only by hand using a
solution of warm water and a small
amount of liquid dish soap applied
with a soft sponge.
 Clean any soiling from the flame
openings.

Risk of explosion.
Blocked flame openings can cause a
dangerous build-up of gas in the
base of the cooktop which could ig-
nite and cause an explosion. This
can lead to damage to the appliance
and injury.
Ensure the flame openings are kept
clean at all times.
 Parts of the burner that cannot be re-
moved should be wiped clean with a
damp cloth only.
 The ignitor and thermocouple should
be very carefully wiped clean using a
well wrung out cloth.
Do not let the ignitor get wet. If it gets
wet, it will not spark.
 Finally dry everything thoroughly with
a clean cloth. Make sure that the
flame openings are completely dry.
28