Table of Contents
Advertisement
WA6000R_DC68-04120D-01_EN.indd 19
Pump type (Applicable models only)
A
1. Open the hose cap (A), and insert the
drain hose. Tighten the drain hose using
the joint ring.
NOTE
•
The position (side or rear) of the drain
outlet depends on the model.
•
Availability of the hose cap depends on
the model.
2. Connect the other end of the drain hose
to a standpipe or basin that is positioned
90-100 cm (*) from the floor.
WARNING
Make sure the end of the drain hose is
not submerged by water. Otherwise, the
washing machine may suffer serious
damage.
English 19
2021-12-09
2:23:14
Advertisement
Table of Contents
