Table of Contents
Advertisement
Before you start
STEP 4 Prewash (if necessary)
•
To remove stains and dirt on collars, sleeves, hems, and pockets, apply detergent lightly
and brush off.
•
Use powder or liquid detergents. Do not use soap, as this may remain on the tub after
washing.
•
Prewash white socks, sleeves, and collars with a little detergent and a brush.
CAUTION
Make sure the laundry is inserted completely.
•
Any exposed part of the laundry may cause damage to the machine or the laundry itself,
or a water leak.
•
Make sure the laundry does not exceed the plastic area (A) in the above figure.
STEP 5 Determine the load capacity
Make sure the laundry does not exceed the plastic area (A) in the figure on page 25.
Otherwise, it may cause the washing machine to not wash properly or cause damage to the
machine or the laundry itself, or a water leak.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efficiency may be reduced. For bedding or bedding covers, the recommended load capacity is
3.5kg or less.
CAUTION
If the laundry is unbalanced and the "Ub" information code is displayed, redistribute the load.
Unbalanced laundry may reduce the spinning performance and cause damage to the machine
or the laundry itself.
26 English
WA6000R_DC68-04120D-01_EN.indd 26
2021-12-09
2:23:15
Advertisement
Table of Contents
