Table of Contents
Advertisement
Super X13SAQ User's Manual
Device Settings
The I/O and IRQ address for serial port 5 is IO=220h; IRQ=11;.
Serial Port 6 Configuration
Serial Port 6
Use this feature to enable or disable serial port 6. The options are Disabled and Enabled.
Device Settings
The I/O and IRQ address for serial port 6 is IO=228h; IRQ=10;.
Network Configuration
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible
Firmware Interface (UEFI) for network stack support. The options are Disabled and Enabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media Detect Count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
82
Advertisement
Table of Contents
