Supermicro X13SAQ User Manual page 78

Super X13SAQ User's Manual
DMI/OPI Configuration

The following DMI information will display:
•
DMI: X8 Gen4
DMI Gen3 ASPM
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disabled, Auto, ASPM L0s, ASPM
L1, and ASPM L0sL1.
PEG Configuration

PCIe M.2-C
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed in the M.2 slot. The op-
tions are Auto, Gen1, Gen2, Gen3, and Gen4.
CPU SLOT7 PCIe 5.0 X16
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled and Enabled.
Max Link Speed
Use this feature to select PCIe support for the device installed on SLOT7. The options
are Auto, Gen1, Gen2, Gen3, Gen4, and Gen5.
GT - Power Management Control

RC6 (Render Standby)
Use this feature to enable render standby support. The options are Disabled and En-
abled.
78