Seagate ST8000NM0055 Product Manual page 2

Document Revision History
Revision Date
Rev. A 10/29/2015
Rev. B 03/29/2016
Rev. C 04/18/2016
Rev. D 11/30/2016
Rev. E 04/05/2017
Rev. F 10/06/2017
Rev. G 11/20/2017
© 2017 Seagate Technology LLC. All rights reserved.
Publication number: 100780701, Rev. G November 2017
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. PowerChoice and SeaTools are either
trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of
NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1 (877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different
standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage.
Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment
and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for
more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.
Pages affected and Description of changes
Initial release.
7: Changed "Ambient temperature" to "Drive case temperature"
10: Removed "Peak" from DC Power table
18: Updated Australian RCM statement
20: Updated Storage statement
fc, 5, 7, 9 & 31: Added SED FIPS models
26: Added Section 5.0 About FIPS
fc, 5, 7, 9 & 31: Added 8TB Power Balance model - ST8000NM0165
7: Updated Temperature spec rows to latest format
18: Revised to Korean RRA & Added MSIP Korean text for Class B device warning
19: Updated to China RoHS 2
Changed Idle_C 12V Amps to 0.38 & Watts to 5.21
10:
14: Updated Figure 3. Location of the HDA temperature check point
17-20: Updated Safety, EMC, FCC & RoHS sections, per compliance committee
22-23: Updated fastener penetration depth to 0.120 in. in text & mechanical drawing Fig. 6
14: Updated Figure 3: Location of the HDA temperature check point
20: Updated Table 6: Taiwan - Restricted Substances - Unit row headers = HDD & PCBA
22-23: Updated fastener penetration depth in Section 3.4 & Fig. 6 = 0.140 in.