Web Portal; Installer Compliance Responsibility - Ubiquiti Loco5AC-US Quick Start Manual

Verify connectivity in the airOS® Configuration Interface using the UISP™ app or
Web Portal. Both are available for 15 minutes immediately after you power on the
device. If necessary, you can power cycle the device to re-enable its Wi-Fi.
UISP App
1. Download the UISP app.
2. Connect your device's Wi-Fi to the SSID named: <model>:<MAC Address>
Note: Ensure that DHCP is enabled on your Wi-Fi adapter.
3. Launch the app and follow the on-screen instructions.

Web Portal

1. Connect your device's Wi-Fi to the SSID named: <model>:<MAC Address>
Note:
Ensure that your Wi-Fi connection has DHCP enabled.
2. Launch your web browser and go to: http://setup.ui.com
3. Select your Country and Language. You must agree to the Terms of Use to use
the product. Click Continue.
4. Create a username and password. Confirm your new password and then click
Save.
The airOS Configuration Interface will appear, allowing you to customize your
settings as needed. For additional details, refer to the User Guide available at
ui.com/download/airmax-ac

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional installer's
responsibility to make sure the device is operated within local country regulatory
requirements.
The Output Power field is provided to the professional installer to assist in meeting
regulatory requirements.
Loco5AC Quick Start Guide