CDA SK451 Installation Manual page 21

cause premature failure. Always use a clean cloth or gloves.
• Reattach the glass cover, pressing it firmly into position.
• Hook the catalytic panel back into position.
• Replace the side rack by locating the two hooks at the top and
clipping it back into position on its lower fixing stud.
• Replace the oven shelves and grill pan as necessary.
Please note:
Bulb replacement is not covered by your guarantee.
Replacing the catalytic liners
Liners on the side walls
• Remove all shelves and the grill pan from the oven.
• Gently unclip the side rack from its lower locating stud and unhook
its top to remove it.
Note: No tools are required and the stud should not be removed.
• Lift the catalytic liner from the oven side, noting how it hooks into
position.
• Replacement is a reversal of the removal process.
Liner on the back wall
• Remove all shelves and the grill pan from the oven.
• Remove the two screws securing the bottom of the back liner to the
oven by turning them anticlockwise.
• Lift the catalytic liner from the oven back, noting how it hooks into
position.
• Replacement is a reversal of the removal process.
21