Table of Contents
Advertisement
11-3. I ni ti a l setti ng s
From the Main display, select " Main menu" > " Initial settings" to make the settings for the remote controller.
Unit1
FRI
Date/Time
Date Format
Daylight saving time
Language
Contrast
[ 1] D a te/ Ti me
Procedures
1. Use the [ F1] or [ F2] button to move to the item you want to change.
2. Use the [ F3] or [ F4] button to change the year (4 digits), month, day, hour
and minute and then press the [ Select] button to update the settings.
The updated settings data will be applied to the date/time display on the
Main display.
3. After the settings are completed, use the [ Menu] button to return to the
Main display.
Note
The date and time should always be set when you first use the system or after the system has been left
unused for a long period, as the setting is required for date/time display, the scheduling function and for the
history files for errors, etc.
[ 2] D a te F orma t
Procedures
1. The display format changes as shown below each time you press [ F3] .
2. Use the [ Select] button to change the setting.
The Main display, etc. will be displayed in the newly selected date format.
Display
3. After the settings are completed, use the [ Menu] button to return to the
Main display.
WT08011X 02
Initial settings menu (1/2)
Date/Time
Date Format
Daylight saving time
Language
Contrast
3
3
3
Initial settings menu (2/2)
RC name
Main/Sub
23
If a system controller is
connected, the following
settings cannot be made:
Date/Time
Daylight saving time
Unit1
FRI
Date/Time
Unit1
FRI
Date Format
Advertisement
Table of Contents
