...6 PROGRAMMING
...Electrical Calibration Page
Continued from previous page.
Cal Time 1
10 m
Cal Time 2
10 m
Cal Time 3
10 m
Alter Cal Code -----
or
Enter
or
Nitrate
<unit>
28
Calibration Time 1
The displayed value is preset at the factory and must not be altered.
See Table 7.1.
Advance to next parameter.
Calibration Time 2
The displayed value is preset at the factory and must not be altered.
See Table 7.1.
Advance to next parameter.
Calibration Time 3
The displayed value is preset at the factory and must not be altered.
See Table 7.1.
Advance to next parameter.
Alter Calibration Code
The calibration user code inhibits access to the Set Up Temperature Control Page
and the Calibration Page – see Section 6.2.8.
Set a suitable user code, between 0 and 19999.
Store.
Return to top of Electrical Calibration Page.
or
Return to Operating Page 1.