ABB Nitrate 8236 Instruction Manual page 21

Continued from previous page.
Test Output Zeros
Test Output FSD
Alter Sec. Code
or
Enter
xxx•x%
% Output
or
SET UP ALARMS
Test Current Output Zeros
The instrument automatically transmits a current output zero test signal on both
outputs.
Example – For a 4 to 20 mA current output range, 4 mA is transmitted.
Advance to next parameter.
Test Current Output Full Scale
The instrument automatically transmits a current output full scale test signal on both
outputs.
Example – For a 4 to 20 mA current output range, 20 mA is transmitted.
Advance to next parameter.
– – – – –
Alter Security Code
Set the Security Code required, between 0 and 19999. This value must then be
entered again to access the secure parameters from Operating Page 1.
Store.
Advance to next parameter.
Proportional Output Percentage (to heater)
Used as a diagnostic check to indicate the proportionally controlled current output (%)
to the heater.
Return to top of Current Output Page.
or
Advance to Set Up Alarms Page.
6 PROGRAMMING...
19