Programming Your Pump - Nutricia flocare Infinity Instruction Book

PROGRAMMING YOUR PUMP STEP BY STEP
Press and hold FILL SET
until the pump beeps.
To stop fill cycle press
FILL SET again.
DO NOT OVERFILL.
Connect giving set to feeding
tube, open clamp if applicable.
(continued)
Press the Start/Stop
button and the word
'RUN' will appear in the
top right of the screen.
If you wish to pause
the feed, press the
Start/Stop button.
To restart press the
Start/Stop button again.
The pump will alarm and stop running
when the full dose has been delivered.
When the feed has finished, turn off the
pump, disconnect the giving set from the
feeding tube and flush the feeding tube
with water as prescribed by your Dietitian.
Flocare Pump Instruction Book & Guide 6