Nutricia flocare Infinity Instruction Book page 5

Press and hold the On/
Off button until it beeps.
a) Wait for the word
'VOLUME' to appear
on the screen; the
number above it is
the previous amount
of feed delivered.
b) Press the CLR
button (short press).
The screen will change
to display ml/h.
STEP BY STEP PROGRAMMING YOUR PUMP
The rate in
ml/hr is now
on screen. If
necessary press
the +/- button to
reach the desired rate.
a) Now press the Dose = Vol
VOLUME
button, 'CONT' will
appear on screen. If it
does not, press CLR
button for continuous
feeding. NOTE: It is safer
to set a dose by following
step b) below
b) To set a dose (total
amount of feed), press
+ button to reach the
desired amount.
Flocare Pump Instruction Book & Guide
CONT
5