SMS to PABXs
•
The Call Line Identification must be forwarded to the extension of the PABX (CLIP).
•
If necessary, the access code/outside line code must be prefixed to the number of the SMS
service centre (depending on your PABX). To test: Send an SMS to your own number, once
with the access code and once without.
•
If the SMS is sent without the extension number, it will not be possible for the recipient to
answer directly.
Activating/deactivating first ring muting
Every incoming SMS is indicated by a single ring. If such a "call" is answered, the SMS is lost. To
prevent this, mute the first ring for all external calls. In idle status:
(e.g. 1) . . . then
Do not mute the first ringtone:
Mute the first ringtone (default setting):
SMS troubleshooting
E0
Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not
activated.
FE
Error occurred while sending SMS.
FD
Connection to SMS service centre failed, see self-help.
Self-help with errors
You cannot send messages
•
You have not requested the CLIP service (Calling Line Identification Presentation).
Ask your network provider to enable the feature.
•
SMS sending was interrupted (e.g. by a call).
Re-send the SMS.
•
The network provider does not support this feature.
•
No number or an incorrect one has been entered for the send service centre.
Enter the number (
SMS text is incomplete
•
The phone's memory is full.
Delete old SMS messages.
•
The network provider has not yet sent the rest of the SMS.
. . . the current setting flashes in the input field
p. 50).
SMS (text messages)
OK
OK
51