Table of Contents
Advertisement
Operation with a router
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings
System
De-registering a repeater
Settings
select repeater
Operation with a router
When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
OK Normal mode
OK XES mode 1
OK XES mode 2
If there are no problems with echoes, the normal mode (factory settings) should be
activated.
58
Repeater
OK
System
De-reg.
Yes
Press and hold the Registration/paging
OK
Repeater
press one of the following keys
OK
use
to
Advertisement
Table of Contents
