Table of Contents
Advertisement
Charge the battery
Charge the battery fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The battery is fully charged when the power icon
disappears from the display.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by Please register handset),
register the handset manually (
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
•
Attaching the belt clip:
handset so that the tabs on the belt clip click into place in the
notches.
•
Removing the belt clip:
with your right thumb.
between the clip and the casing.
remove.
Changing the display language
You can change the display language if the phone is set to a language not required.
Press the centre of the control key
Press the keys
language settings display appears, the set language
(e. g. English) is highlighted (
To select a different language:
the desired language is highlighted on the display,
e. g. Francais
press the key on the right directly underneath
the display to activate the language.
To revert to idle status:
p. 55).
Press the belt clip onto the back of the
Press the centre of the belt clip firmly
Push the nail of your left thumb up
Slide the clip upwards to
.
and
slowly and successively . . . the
= selected).
Press the control key
Press and hold the End call key
2.5 h
Example
Deutsch
English
until
Francais
Handset
11
Advertisement
Table of Contents
