After Use; Removing The Propellers - Sony Airpeak S1 Startup Manual

After use

Removing the propellers

1
Make sure the aircraft is off.
Confirm that the power status LED of the aircraft is off.
2
Remove the battery packs from the aircraft.
While pressing the BATTERY RELEASE levers (), push out the projecting parts on the sides of the battery packs in
the directions of the arrows to remove both battery packs ().
Notes
• Battery packs are still hot immediately after use. Handle with care.
• When removing the battery packs, be careful not to drop them.
• When removing the battery packs, carefully press the BATTERY RELEASE levers so that the battery packs do not hit your fingers when
they come out.
42
E
LE AS
ER Y RE
BA TT
Power status LED
BATTERY RELEASE levers
E R Y
B A T T
AS E
RE LE
ER Y
BA TT
A S E
R E L E