Sony Airpeak S1 Startup Manual page 27

4
Press and hold the LINK button on the aircraft.
Within 2 min., press and hold the LINK button on the aircraft for 2 sec. to link it and remote controller. Successful
linkage is indicated by a remote controller blue status LED (in purple when linked as [Sub] in dual operation mode)
and the message [Aircraft and remote controller connected] on the "Airpeak Flight" app screen.
If linkage fails, check for obstacles between the aircraft and the remote controller. Move the aircraft and remote
controller to avoid obstacles and tap [Retry] to try again.
5
Perform aircraft setup.
After the successful linkage screen displayed, tap [Start using] to set up the aircraft. When the message
[Now the aircraft is ready to fly] is displayed, setup is complete.
LINK button
E
LE AS
ER Y RE
BA TT
27