Sony Airpeak S1 Startup Manual page 19

2
Connect the cables to the aircraft.
Connect the cables to the connection hub on the aircraft.
 Control cable
(aircraft — gimbal)
Front of aircraft
 Connect the control cable (aircraft — gimbal) to the control port.
Rear of aircraft
 Connect the power cable (aircraft — gimbal) to the POWER port.
 Connect the USB Type-C® cable (aircraft — gimbal) to the USB port.
Notes
• When placing the aircraft upside down, be careful to keep the propeller attachment points of each motor off the surface.
• A locking mechanism is used on the control cable (aircraft — gimbal) and power cable (aircraft — gimbal). Insert fully until the plug
locks into place.
¼
Hint
You can connect the USB Type-C® cable (aircraft — gimbal) to either USB port (USB or EXT port).

 USB Type-C® cable
(aircraft — gimbal)
 Power cable
(aircraft — gimbal)


19