Sony Airpeak S1 Startup Manual page 32

[3] Connecting cables between the camera and gimbal
Use the included USB cable to connect ports on the camera and gimbal.
1
Connect the USB cable to the camera.
Insert the plug of the included USB Type-C® cable (gimbal — camera) or micro USB cable (gimbal — camera) in the
camera USB port. Connect the USB cable that matches your camera port.
2
Connect the USB cable to the gimbal.
Insert the other end of the USB cable connected to the camera in the gimbal USB port.
Notes
• Positions of camera ports vary by camera.
• If you adjust the tilt axis of the gimbal, the USB cable may come into contact with the frame of the gimbal. Route the USB cable so that
it does not come into contact with the gimbal frame.
32