Table of Contents
Advertisement
How to remount the emergency switch
The emergency switch is attached to the starboard side of the hull unit. If the starboard
side clearance is not sufficient for switch operation, the switch may be remounted on
the port side.
1. Unfasten the four screws to remove the box base.
2. Unfasten the two screws to remove the box cover.
Screw (4 pcs)
Emergency switch
3. Remount the emergency switch to the port side.
4. Secure the emergency switch cable, using the three wiring bands. Wiring band
must be secured to the hull unit, using pan head screws (M4×12).
Wiring band
Box base
Box base
Screw (2 pcs)
Wiring band
1. HOW TO INSTALL THE SYSTEM
Box base (rear side)
Box base (rear side)
Box cover
Box cover
1-7
Advertisement
Table of Contents
