Carrera DIGITAL 143 DTM RACING Manual
- Assembly and operating instructions manual (24 pages) ,
- Assembly and operating instructions (4 pages) ,
- Assembly and operating instructions manual (8 pages)
Advertisement
How to use
Subject to technical and design-related changes
Preparation of start and points function
Make sure that the car's guide + 2 keel is located inside the track slot and that the double sliding contact is in contact with the current carrying track. Place the cars onto the connecting track. 3 When changing lanes, you must keep the button on the speed controller depressed until the car has passed the point.
When changing lanes, you must keep the button on the speed controller depressed until the car has passed the point.
None of the programming steps may exceed 1 second per click.
Coding/decoding of the cars to the according speed controller
Place car on the track, push lane-changebutton twice fig.
lift car at the front, 1 put car back again fig.
push lane-2 change-button twice fig. 
Programming is confirmed by a tone. All settings are saved until new programming is carried out.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the DIGITAL 143 and is the answer not in the manual?
Questions and answers