AGFA Drystar AXYS User Manual page 27

Warning labels
The following samples illustrate some of the warning labels (ISO 3864 Safety
Signs define the design principles for international safety signs) that may
appear on the medical equipment.
Symbol
Protective earth (ground):
Provides a connection between the printer and the protective
earth of the mains. Do not remove this connection, because this
will have a negative influence on the leakage current.
Power button:
Note that the power cord has to be disconnected from the wall
outlet in order to disconnect the unit entirely from the mains.
Precautions for use in USA only:
Make sure that the circuit is single-phase center-tapped, if the
printer is connected to a 240 V/60 Hz source instead of a 120
V/60 Hz source.
Date of manufacture
Manufacturer
Serial number
WEEE symbol, see section Environmental Protection
Device contains a transmitter module
Explanation
Dangerous voltage
Drystar AXYS | Introduction | 27
2852D EN 20161128 1416