Sd Card Status; Sd Card Format; Figure 7-1 No Sd Card; Figure 7-2 Sd Card Onboard - Honeywell 60 Series Configuration Manual

Honeywell 60 Series IP Camera Software Configuration Guide
•
It is recommended to turn OFF the recording activity before
you remove an SD card from the camera.
•
The lifespan of an SD card is limited. Regular replacement of
the SD card can be necessary.
•
Camera file system takes up several megabytes of memory
space. The storage space cannot be used for recording.
Note
•
Using an SD card that already contains data recorded by
another device should not be used in this camera.
• Do not modify or change the folder names in the SD card. That
may result in camera malfunctions.
• If you want to use the SD card in another camera, format the
SD card in another camera first. For how to format the SD card,
see

SD Card Status

This tab shows the status and reserved space of your SD card. Remember to format the SD
card when using it for the first time, see

Figure 7-1 No SD Card

Figure 7-2 SD Card Onboard

SD Card Format

Figure 7-3 SD Card Format

To format the SD Card, click FORMAT.
58
SD Card Format on page 58.
SD Card Format on page 58.