Table of Contents
Advertisement
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing cartridge group
Unplug cable connector (86515) and unscrew speed sensor (86505)
with O-ring (86506).
Remove the O-ring (42012).
Remove the three screws (61059) together with their Verbus Ripp®
washers (61058).
Attach one lifting gear each to the two fins of the bearing casing pro-
vided for this purpose.
Evenly press off cartridge group by screwing press-off screws (90900)
into the designated holes.
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
the rotor.
Operation Manual / TPL65VA10 / VA30
8
8.5
Page 96
Advertisement
Table of Contents
