ABB TPL65VA10 Operation Manual page 36

NOTICE
© Copyright 2016 ABB. All rights reserved.
Start-up
Oil supply
Oil pressure
The oil pressure in front of the turbocharger must be maintained precisely
to ensure trouble-free operation.
The permissible oil pressure ranges at measuring point M (blind connec-
tion) on the turbocharger are listed below.
Status for operation
Permissible, for normal operation
Permissible, during engine warm-up
Temporarily admissible ( < 1 h ) -> alarm
Not permissible -> emergency stop
Permissible, during pre- and post-lubrication
(engine stopped)
Oil orifice
A metering orifice is installed in the oil inlet of the turbocharger to en-
sure these oil pressures. The orifice is installed by the enginebuilder
and it is fixed in place with a locking ring.
Operation Manual / TPL65VA10 / VA30
3
3.1
Oil pressure in front of the turbo-
charger p
1.3 ... 2.5
1.3 ... 5.0
1.1 ... 1.3
0.0 ... 1.1
0.2 ... 2.5
Page 34
[bar]
oil,in