ABB TPL65VA10 Operation Manual page 60

CAUTION
© Copyright 2016 ABB. All rights reserved.
Maintenance
Cleaning the filter silencer
Fitting the filter silencer
Assemble the insert units (E) by inserting the absorption segments

(81136) into the sheet metal coverings (81137).
Bend sheet metal coverings (81137) back to original shape.

Insert the insert units (E) into slot guides in filter silencer unit (81135).

Uniformly place cover grids (81266) in correct position.

Push connecting rods (81269) through lugs of cover grids (81266).

If the connecting rods (81269) are not correctly positioned in their re-
cesses on the filter silencer unit (81135), the cover grid (81266) can
twist and shift. There is then a risk of foreign matter and contamination
getting into the compressor.
Operation Manual / TPL65VA10 / VA30
5
5.2 Page 58