Advertisement
Operation
Operation
Ensure the power supply is connected to unit and that circuit breakers are on.
Tilt skillet to ascertain that it moves easily. Turn handle as far as it will go and return to upright position.
Turn power switch "ON". Set thermostat dial to desired temperature. Preheat skillet and allow it to cycle several
times to equalize the heat across entire pan surface. Cooking will occur faster with the cover down.
At the end of cooking turn thermostat to "OFF", turn power switch "OFF", remove product.
The skillet is equipped with a safety switch that is activated when the pan is tilted. In the tilted position, power supply
to the heating elements is interrupted. The unit can only be operated in the down position.
When this appliance is installed with casters, a restraint to prevent damage to the power supply conduit should
have been installed. If disconnection of the restraint is necessary, reconnect this restraint after the appliance
has been returned to its originally installed position.
6
PAGE
OF 12
NOTICE
WARNING
Never tilt pan with cover down.
WARNING
INSTALLATION & OPERATION MANUAL 10089 REV 4 (09/22)
Electric Tilting Skillets
Advertisement
