Care And Maintenance, Recalibration; Reference To Standards - Medel ACMNP-1 Instruction Manual

11. CARE AND MAINTENANCE
EN
Care
• Keep the unit in the storage case when not in
use.
• Clean the unit with a soft dry cloth. Do not use
any abrasive or volatile cleaners.
• Never immerse the unit or any components in
water.
Maintenance
• Do not clean the body and cuff with naphtha,
thinner or gasoline etc.
• Do not wet the cuff or attempt to clean the cuff
with water.
• Store the unit in a clean and dry location.
Do not subject the unit to extreme hot or cold
temperature, humidity and direct sunlight.
• Remove the batteries if the unit will not be used
for 3 months or longer. Always replace all of
the batteries with new ones at the same time.
Use the unit consistent with the instructions provided in this manual.
Use only authorized parts and accessories.
40

12. REFERENCE TO STANDARDS

Device standard: Device corresponds to requirements of the European standard
for non-invasive blood-pressure monitor.
-EN 1060-1 Non-invasive sphygmomanometers - Part 1: General requirements
-EN 1060-3 Non-invasive sphygmomanometers - Part 3: Supplementary requirements
for electro-mechanical blood-pressure measuring systems.
-EN 1060-4 Non-invasive sphygmomanometers - Part 4: Test procedures to determine
the overall system accuracy of automated non-invasive sphygmomanometers.
-EN 60601-1
-ANSI/AAMI SP10
Electromagnetic compatibility: Device fulfils the stipulations of the European
L'apparecchiatura ha superato il test EMC.
The stipulations of the EU-Guidelines
93/42/EWG for Medical Products Class IIa have
been fulfilled.
Correct disposal of the product (electric and electronic
waste)
(Applicable in the countries of the European Union and in the countries
using systems for separate collection of waste)
The symbol on the product or its manuals indicates that the product
complies with the directive WEEE (waste electrical and electronic equi-
pment) and must not be disposed of among domestic waste. At the end
of its lifecycle, the user shall dispose of the equipment in specific collec-
tion areas, Otherwise, the sanctions foreseen by the current laws about
waste are applicable. For detailed information concerning available
collection systems, refer to the local waste disposal services.
ATTENTION: Read the instructions
standard IEC60601-1-2
EN
41