Exceptional Situations - Medel ACMNP-1 Instruction Manual

EN Unit Setting (kPa or mmHg)
Long press the memory button
for 3~4 seconds until the units
displayed when the unit
powered off.
36
Memory Values Cleaning out
When reading the measurement
values, press and hold the "MEM"
button, then press START/STOP
button for about 3-4 seconds.

9. EXCEPTIONAL SITUATIONS

Error Indicators
The following symbol will appear on the display when measuring abnormal.
Symbol Problem Correction
Wrap the cuff properly.
The course of infla-
Make sure that the air plug is properly inserted in the unit.
ting appears error.
Inflate over again after ensuring.
Do not move and talk while measuring.
Measure over again according to correct way.
When the batteries Replace all of the worn batteries with new ones.
power are too low.
Eliminate Fault
Problem
No power.
No display appears on the display screen.
Measurement values appear too high or too low.
Causes and Solutions
Replace all the worn batteries with 4 new ones.
Check the battery installation for proper place-
ment of the batteries polarities.
Blood pressure varies constantly. Many factors
including stress, time of day, how you wrap the
cuff, may affect your blood pressure. Review the
sections "Proper Use of the Arm Cuff" and "Take
a Measurement".
EN
37