Lan Led Connectors: J7 & J9; System Status Led Header: J11; Redundancy Power Smbus Connector: J5; H/W Monitor Smbus Connector: J6 - MSI E7320 Master-S User Manual

MS-9152 ATX Server Board
LAN LED Connectors: J7 & J9
The LAN LED connectors are used to connect LAN LEDs, which show the
activity of the LAN. The J7 is for JLAN 1 jack and the J9 is for JLAN2 jack. Both JLAN
1 & JLAN2 jacks are located on the back panel.

System Status LED Header: J11

Connect an LED to this header and the LED will glow when the CPU, system, or
power fan shuts down.

Redundancy Power SMBus Connector: J5

H/W Monitor SMBus Connector: J6

The mainboard provides I2C (also known as I
connect the System Management Bus (SMBus) interface.
2-16
J7
-
-
J9
J11
J5
PIN
1
5
1
1
5
2
J6
3
4
5
+
+
2 C) Bus connectors for users to
Pin Definition
SIGNAL
SMBCLK
SMBDATA
SMBALERT#
GND
VCC3