MSI E7210 Master-FARM User Manual page 26

MS-9149 ATX Server Board
version supported by your operating system. To find out which version to use,
consult the vendor of your operating system. Settings: 1.4, 1.1.
Console Redirection
Console Redirection operates in host systems that do not have a monitor and
keybo ard attached. This sett ing enab les/disables the operation of co nsole
redirection. When set to Enabled, BIOS redirects and sends all contents that
should b e displayed on the screen to t he serial COM port for display on the
terminal screen. Besides, all data received from the serial port is interpreted as
keystrokes from a local keyboard. Setting options: Enabled, Disabled.
Baud Rate
This setting specifies the transfer rate (bits per second) of Console Redirection.
Setting options: 9600, 19200, 38400, 57600, 115200.
Agent Connect via
To operate the syst em's console redirection, you need a terminal supporting
ANSI terminal protocol and a RS-232 null modem cable connected between the
host sy stem and terminal(s). This field is a read-only field, which is used to
indicate the type of device connected between the host system and terminal
(s). NULL stands for a null modem.
Agent wait time (min)
This setting controls the timeout for terminals' (console redirection) connec-
tion to the host system. Setting options: 1, 2, 4, 8 (Min).
Agent after boot
This setting determines whether or not to keep terminals' console redirection
running after the OS has booted. Setting options: Disabled, Enabled.
DMI Event Log
This setting disables or enables the BIOS to log DMI (Desktop Management
Interface) events. Setting options: Enabled, Disabled.
Clear All DMI Event Log
When this setting is set to Yes, the DMI event log will be cleared at next
POST stage. Then, the BIOS will automatically set this option to No.
Setting options: Yes, No.
3-12
View DMI Event Log
Press <Enter> to view all DMI event logs.
Mark DMI Events as Read
Press <Enter> and a screen pops up, asking users to confirm whether or not
to clear all DMI event logs immediately. Press <Y> and <Enter>, the BIOS
will clear all DMI event logs right away.
Event Log Capacity
The item allows the system to show if there is enough space for event logs.
Event Log Validity
The item allows the system to show if the event logs are valid.
Care Open Warning
The field enables or dis ables t he feat ure of recording the chassis intru sion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to Reset. The setting of the field will auto-
matically return to Enabled later. Settings: Enabled, Reset, Disabled.
CPU Feature
Press <Enter> to enter the following sub-menu screen.
Delay Prior to Thermal
When the CPU temperature reaches a factory preset level, a thermal monitoring
mechanism will be enabled following the appropriate timing delay specified in
BIOS Setup
3-13