Cisco SX10 User Manual page 5

Changing Call Audio Options
A. To adjust the volume, use the
the remote control. Ensure the TV volume is appropriate
using the TV remote control.
Note: You cannot adjust the volume while adjusting
camera control.
B. To mute the microphone so that others cannot hear you,
press the mute button on the remote control or microphone
itself. The button on the microphone will be
muted.
Press either button again to unmute. The microphone
button will be green when unmuted.
Note: Other participants cannot hear you while you are
muted, they are still able to see you.
Sharing Content
A. During a Telehealth call you may want to share a
document or presentation. To do this, make sure your
presentation/documentation source is connected and on.
You may need to select
bottom of the screen, if it appears) and press
top remote control.
C. The size of the shared images is controlled by means
of the 'Minimize/Maximize'
bottom of the display (number two from the left). Select
this and press 'OK' on the remote control, if needed.
Ending The Call
To leave or end the call, press the
remote control or use the cursor keys to select
'OK' to end the call.
If you have technical difficulties with your call, please contact your regional help desk.
'+/-' button at the top of
red
'Share' (located in the center
'OK'
field which appears along the
red 'End Call'
'End'
when
on the
button on the
and then press
B. Your source will now be shared.
D. To stop sharing content, select
(which appears along the bottom of the display,
number one from the left) and press
remote control.
'Stop sharing'
'OK' on the
August 2019