Cisco SX10 User Manual page 3

Changing Call Display Options
1. Self View
A. Go to the camera icon in the top right
corner of the screen and press
C. To change the position of the self-view
window, go to the 'Layout'
left corner of the screen and press
E. The self-view image will now turn
show that it has been selected. Click
the remote control. Arrows will now appear to
indicate that the self-view image can be
moved. Possible new locations are indicated.
2. Change Call Layout
A. Navigate to 'Layout'
corner and press 'OK' on the remote control.
The icon below will appear only when relevant.
B. Use the horizontal arrow keys on the remote
control to move horizontally to the new layout
you would like to use and press
layout.
'OK.'
icon in the top
'OK.'
blue to
'OK' on
in the upper right
'OK' to select a
B. Select the push pin icon and press 'OK.' To
turn off self-view press
again.
D. The layout menu will now appear. Press the
down arrow on the remote control to navigate to
the self-view image.
F. Use the arrow keys on the remote control to
move the image and press
'OK' on the push pin
'OK' when finished.
August 2019