MSI 655 Max User Manual page 62

1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where
AMIBIOS attempts to load the operating system. The settings are:
IDE-0 The system will boot from the first HDD.
IDE-1 The system will boot from the second HDD.
IDE-2 The system will boot from the third HDD.
IDE-3 The system will boot from the fourth HDD.
Floppy The system will boot from floppy drive.
ARMD-FDD The system will boot from any ARMD device, such as
LS-120 or ZIP drive, that functions as a floppy drive.
ARMD-HDD The system will boot from ARMD device, such as MO
or ZIP drive, that functions as hard disk drive.
CD/DVD-0 The system will boot from the first CD/DVD ROM.
CD/DVD-1 The system will boot from the second CD/DVD ROM.
CD/DVD-2 The system will boot from the third CD/DVD ROM.
CD/DVD-3 The system will boot from the 4th CD/DVD ROM.
Legacy SCSI The system will boot from the SCSI.
Legacy NETWORK
The system will boot from the Network drive.
BBS-0 The system will boot from the first BBS (BIOS Boot
Specification) compliant device.
BBS-1 The system will boot from the second BBS (BIOS Boot
Specification) compliant device.
BBS-2 The system will boot from the third BBS (BIOS Boot
Specification) compliant device.
BBS-3 The system will boot from the 4th BBS (BIOS Boot
Specification) compliant device.
BBS-4 The system will boot from the 5th BBS (BIOS Boot
Specification) compliant device.
BBS-5 The system will boot from the 6th BBS (BIOS Boot
Specification) compliant device.
BBS-6 The system will boot from the 7th BBS (BIOS Boot
Specification) compliant device.
BIOS Setup
3-9