Napoleon BIPRO665RB Service Manual page 17

BUILT-IN UNIT OPENING DIMENSIONS
MODEL OPENING DIMENSIONS
W
BIPRO665 38"
965mm
SIDE BURNER
N370-0504 -LPG 12 3/4"
N370-0505 -NAT 324mm
WARNING!
serviced by a qualified installer to local codes.
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance.
Do not use wood or drywall.
Note: Accessory frames
overlap opening by 1 ¾"
on all 4 sides.
ELECTRICAL OPENING
34" (864mm)
RECOMMENDED
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
N415-0424 OCT 23.17
NOTES
D H
20 5/8" 8 7/8"
524mm 225mm
16 1/2" 4 1/2" OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
419mm 114mm COMBUSTION AIR FOR SIDE BURNER.
This grill is designed for Non-combustible enclosures only, and must be installed and
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
H
WARNING!
CABINET FRAME, CABINET AND COUNTER
TOP MUST BE MADE FROM NON-COMBUSTIBLE MATERIAL.
BUILT-IN SIDEBURNER
IF THE COUNTER TOP IS OVERHANGING THE EDGE OF
THE ENCLOSURE THE CORNERS MUST BE NOTCHED
A MINIMUM OF 1 3/16" (30 mm) TO ACCOMODATE
THE CONTROL PANEL END CAPS.
WARNING!
A propane tank can not be
stored below the gas grill.
17
EN
www.napoleongrills.com