Table of Contents
Advertisement
Model No.
RG-R811LA
GENERAL SAFETY INFORMATION
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always
observe the following safety precautions.
The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage
caused when the denotation is disregarded and improper use is performed.
WARNING
CAUTION
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to
operate this unit safely.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users not to disassemble the equipment.
This symbol is used to alert users to make sure of grounding when using the equipment with the grounding
terminal.
READ AND SAVE THESE INSTRUCTIONS
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before attempting to
install, operate or service the Panasonic product. Please
carefully read the "GENERAL SAFETY INFORMATION".
Failure to comply with instructions could result in personal
injury or property damage. Please explain to users how to
operate and maintain the product after installation and this
manual should be presented to users. Please retain this
manual for future references.
Denotes a potential hazard that could result in serious injury or death.
Denotes a hazard that could result in minor injury.
Denotes a hazard that could result in property damage.
INSTALLATION INSTRUCTIONS
See page 12 for "Panasonic Warranty Sheet".
Ventilating Fan
R8 1 1 L1 4 2 0 A
Advertisement
Table of Contents
Related Manuals for Panasonic WhisperRemodel RG-R811LA
Summary of Contents for Panasonic WhisperRemodel RG-R811LA
- Page 1 READ AND SAVE THESE INSTRUCTIONS Thank you for purchasing this Panasonic product. Please read these instructions carefully before attempting to install, operate or service the Panasonic product. Please carefully read the “GENERAL SAFETY INFORMATION”. Failure to comply with instructions could result in personal injury or property damage.
- Page 2 GENERAL SAFETY INFORMATION (CONTINUED) WARNING To reduce the risk of fire, electric shock or injury to persons, observe the following: Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
- Page 3 Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. SDoC Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102 Customer Call Center:...
-
Page 4: Supplied Accesories
DESCRIPTION (CONTINUED) This device complies with Part 15B of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Type IC-Inherently Protected. -
Page 5: Wiring Diagram
WIRING DIAGRAM *Night Light Fan body Junction box Neutral White Main control circuit AC 120 V 60 Hz Live Black Main (Power supply) control Power switch Motor Green (Ground wire) circuit Power switch Live (N. Light)* Blue Neutral AC 120 V 60 Hz White (Power supply) Live (Light) - Page 6 INSTALLATION (RETROFIT) (CONTINUED) Install Flex-Z Fast™ bracket Flex-Z Fast™ bracket position can be adjusted from 16" to 24" (406mm to 610mm) between joists. Unit: inches (mm) Remove the existing fan and use housing masking template to mark the ceiling Template opening and cut the ceiling along the Joist marked line.
- Page 7 INSTALLATION (RETROFIT) (CONTINUED) Connect wires Live (Fan) Live (Light) Neutral Live Earth ground Neutral (Night Light) White AC 120 V 60 Hz Black (Power supply) Earth ground Green Blue Wire nuts Switch box Switch Conduit Refer to WIRING DIAGRAM (Page 5). Follow all the local electrical safety codes as well as the National Electrical Code (NEC).
-
Page 8: Installation (New Construction)
INSTALLATION (RETROFIT) (CONTINUED) Secure fan body Sealing Joist Drywall Plug connector Flange Joist Joist Receptacle 2 Self-drilling screws (fasten the Machine screw (M4X8) flange and Flex-Z Fast™ bracket through the drywall) Once fan body is mounted and secure, fill gap Secure the fan body to Flex-Z Fast™... - Page 9 INSTALLATION (NEW CONSTRUCTION) (CONTINUED) Install Flex-Z Fast™ bracket Joist Flex-Z Fast™ bracket position can be adjusted from 16" to 24" (406mm to 610mm) between joists. Bend down 4 tabs Unit: inches (mm) 2 Tapping screws (ST4.2X20) Bend down 4 tabs and align bracket to the joist. 2 Tapping screws Align and install bracket to joist by using (ST4.2X20)
-
Page 10: Maintenance & Cleaning
INSTALLATION (NEW CONSTRUCTION) (CONTINUED) Secure fan body Joist When the flange overlaps Flex-Z Fast™ bracket, secure it by using 2 self-drilling screws. Plug connector into receptacle and secure Plug connector fan body to adaptor by using the machine screw (M4X8). Flange Follow the steps 7 to 8 in INSTALLATION (RETROFIT) -
Page 11: Practical Guide To Installation
Mechanically connect duct to termination attic. Panasonic fans do not create excessive heat and seal with mastic or approved foil which is a common problem with recessed light faced tape fixtures and some competitor’s fan/light combination. - Page 12 USA, in the event of defects in material or workmanship in accordance to the following: Service in the USA, can be obtained during the warranty period by contacting the selling Distributor or Panasonic Customer Call Center at 1-866-292-7299, toll free.