Connecting The Power Cable; Training - Garmin TACX NEO BIKE PLUS Owner's Manual

Connecting the Power Cable

The power cable and adapter are in the assembly kit
adapter with the Tacx NEO Bike Plus trainer because this could lead to personal injury or damage to the trainer.
You can use the Tacx NEO Bike Plus trainer with or without power. Some of the trainer features
H
require power, including downhill assistance and USB charging.
1 Plug the power adapter
2 Connect the power cable to the power adapter.
3 Plug the power cable into a standard wall outlet.
4 Rotate the crank.
The display and fans turn on. The floor LED is blue.
18
CAUTION
. Do not attempt to use a third-party power cable or
into the port .

Training

Training