AccuBANKER AB630 User Manual page 20

4. Operation (cont.)
4.2 Sorting / Counting (cont.)
1. Ensure the lateral rejection tube and collecting bag are properly in
place.
2. Adjust the Diameter and Thickness knobs according to the largest
coin present in the bulk. The sorting procedure must start with the
largest coin size and finish with the smallest coin size.
3. Pour the coins you need to count into the internal hopper. Do not
exceed the capacity.
4. Press the START / STOP key to begin counting.
5. The largest coin will be sorted at the end of the first cycle.
6. Readjust the Diameter and Thickness knobs for the next coin size
(Largest).
7. Pour back again all the remaining coins into the hopper.
8. Repeat the process until reaching the smallest size coin.
20