Using Memory Locations - Cobra MicroTalk MicroTalk 2-Way Radio Operating Instructions Manual

FRS305 MANUAL.qx 12/5/00 9:56 AM
Advanced Features
Programming Programming Memory Locations
Memory
After selecting your Memory Channel and
Locations
Main/Sub Channels, for immediate entry
press Talk Button.
or...
Note
After selecting you Memory Channel and
If you push and hold the Mode
Main/Sub Channel,DO NOT press any buttons
Button,the LCD display will
for 10 seconds and your unit will automatically
cycle through the different
set the Memory and Main/Sub Channels. It will
functions.
then go to the NEW channel.
Press and release
Operational Mode original Main Channel.
or...
Press and release
to next Function Mode (Scan).
18
Page 18
Lock Button to return to
Mode Button to proceed
Advanced Features
Memory Channel Recall/Talk
To recall a channel in memory:
Press and release Mode Button until
icon and a memory location flashes.
Select desired memory location you wish
to recall (0-9) by pressing the Channel
Button up or down.
Using Memory
Locations
continued
19