Memory Locations - Cobra MicroTalk Li 6500 WX Owner's Manual

Mode Functions
Operation
Voice Activated Transmit (VOX)
In VOX mode, your microTALK radio can be used "hands-free,"
automatically transmitting when you speak. You can set the VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
Mode Button
1. Press the Mode button until the VOX icon
flashes on the display. The current on or
off setting is displayed.
2. Press the Channel Up or Channel Down
VOX Icon
button to turn VOX on or off.
3. Choose one of the following:
a. Press the Mode button to enter the
selected on or off setting and proceed
Channel Buttons
to other functions.
b. Press the Lock/Enter button to enter
the selected on or off setting and return
to Standby mode.
To set VOX sensitivity:
Mode Button
1. Press the Mode button until the VOX icon
flashes and the current sensitivity level
is displayed.
VOX Sensitivity Level
The current sensitivity level is displayed
with letters "LE" and a Number 01
through 05, with Number 05 being the
most sensitive level and Number 01
being the least sensitive level.
Channel Buttons
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter
the selected setting and proceed to
other functions.
b. Press the Lock/Enter button to
enter the selected setting and return
to Standby mode.
12
All manuals and user guides at all-guides.com
Introduction Operation

10 Memory Locations

•
Your microTALK radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 21 for memory location scan.)
To program a memory location:
Mode Button
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Memory Icon
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
Channel Buttons
code will be shown on the display.
3. Press the Lock/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
Lock/Enter Button
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
5. Press the Lock/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
Customer Assistance Warranty
•
13