Ringer/Vibrate Modes - Cobra MicroTalk MicroTalk 2-Way Radio Operating Instructions Manual

FRS305 MANUAL.qx 12/5/00 9:56 AM
Advanced Features
Scan Function Scan Function
Your microTALK will pick it up for 10 seconds.
Within 10 seconds you can:
Press and hold Talk button and talk.Your ra d i o
will re t u rn to Ope rational Mode on that channel.
Note
or...
If you wish to proceed to the
Press and release Channel Button up or down
next Function Mode, press and
to rescan the main channel.
release Mode Button.
To exit the Scan Mode and return to
Operational Mode:
Press and release
24
Page 24
continued
Mode Button.
Advanced Features

Ringer/Vibrate Modes

Your microTALK will signal you that there is an
incoming transmission with either a tone or a
vibration or both. To set for Ringer/Vibrate:
Turn on microTALK. An audible "tone" will
indicate the unit is on and then the LCD will go
through a 3 second self-test and then go to
Operational Mode.
Press and release Mode Button until
icon flashes.
Press Channel Button up and down until
icon appears for Ringer Only Mode.
Ringer/Vibrate
Modes
continued
25