Adjusting The Amount Of Froth; Making Cappuccinos And Milk-Based Beverages Automatically; Cleaning The Milk Container After Use - DeLonghi DINAMICA PLUS ECAM37 95 Series Instructions For Use Manual

14
4. Place the lid back on the milk container;
5. Remove the hot water spout (D6);
6. Attach the milk container (E3) to the connection nozzle
(A8) and push as far as it will go (fig. 16). The machine
emits a beep (if the beep function is enabled);
7. Place a sufficiently large cup under the coffee spouts (A9)
and the frothed milk spout (E5). Adjust the length of the
milk spout. To move it nearer the cup, simply pull it down-
wards (fig. 17).
16
8. Follow the instructions below for each function.

9.2 Adjusting the amount of froth

Turn the froth adjustment dial (E1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial Description
position
NO FROTH
MIN. FROTH
MAX. FROTH
15
17
Recommended for...
HOT MILK (not frothed) /
CAFFELATTE
LATTE MACCHIATO/
FLAT WHITE
CAPPUCCINO / CAPPUCCI-
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
9.3 Making cappuccinos and milk-based
beverages automatically
1. Fill the milk container (E3) and attach it as described
above.
2. Select the required beverage:
• CAPPUCCINO
• LATTE MACCHIATO
• HOT MILK
• CAPPUCCINO+
• CAPPUCCINO MIX
• CAFFELATTE
• FLAT WHITE
• ESPRESSO MACCHIATO
3. A message on the display instructs you to turn the froth
adjustment dial (E1) according to the froth required by the
original recipe. Turn the dial on the milk container lid.
4. After a few seconds, preparation begins automatically
and an image of the selected beverage appears on the
display, together with a progress bar which gradually fills
as preparation progresses.
Once the coffee has been made, the appliance is ready to make
the next beverage.
Please note! general indications when preparing all milk-
based beverages
• : press to interrupt preparation completely
and go back to the homepage.
• : press to interrupt milk or coffee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
• Preparation of each coffee can be customised (see section
"11. Customising the beverages).
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poor-
er the quality of froth produced.
9.4

Cleaning the milk container after use

2. Place a cup or other recipient under the frothed milk
spout;
3. Turn the froth adjustment dial (E1) to "CLEAN" (fig. 18).
"CLEANING UNDERWAY RECIPIENT UNDER SPOUT" appears
on the display together with a bar which gradually fills as
12
Each time you use a milk func-
tion, "TURN FROTH ADJUST-
MENT DIAL TO CLEAN POSI-
TION" appears on the display
and the milk frother lid must
be cleaned:
1. Leave the milk contain-
er (E3) in the machine (you do
not need to empty it;