Transportation; Environment; General Information - Festool CLEANTEC CTLC MIDI I Original Instructions Manual

English
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.uk.

15 Transportation

Observe the following information:
– Always lock the T-Loc lock on the cordless
mobile dust extractor prior to transporta­
tion.
– Only carry it by the handle [1-1].
– For transportation in vehicles, secure the
cordless mobile dust extractor against slip­
ping and tilting in accordance with the valid
guidelines.

16 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach

17 General information

17.1 Information about Bluetooth
As soon as the tool is connected to the Festool
Work app via Bluetooth
nection has been authorised, the tool will con­
nect automatically to the Festool Work app
from this point onwards. The tool then regularly
sends status information (ID, operating status,
etc.) via Bluetooth .
®
The Bluetooth ® word mark and the logos are
registered trademarks of Bluetooth SIG, Inc.;
they are used by TTS Tooltechnic Systems AG &
Co. KG, and therefore by Festool, under licence.
17.2 Information on data privacy
The tool contains a chip which automatically
stores machine and operating data. The data
saved cannot be traced back directly to an indi­
vidual.
The data can be read in a contactless manner
using special devices and shall only be used by
Festool for fault diagnosis, repair and warranty
processing and for quality improvement or en­
hancement of the device. The data shall not be
24
®
® and the secure con­
used in any other way without the express con­
sent of the customer.