Hyundai HNHP2065 Original Instructions Manual page 11

two provided screws. This place will
help to store easily the accessories.
Slide the trigger gun holder into
3.
position of unit left.
4. Slide the power cord hook into
position of unit right.
5. Installing the spray wand
- Insert firmly the spray wand into the gun
and rotate it clockwise to lock it.
To remove the spray wand, turn it
-
anticlockwise and pull it from the
gun.
NOTE: The two supplied spray wand
are installed in the same way.
Installation of the patio cleaner
6.
(NOTE: This accessory is not
included for this model)
Use this accessory to clean terraces,
driveways, etc.
On the gun, firmly insert the
-
extension tube and then turn it
clockwise to lock it. Then install
the patio cleaner on the tube and
screw it in to lock it.
To remove the patio cleaner, turn
-
the extension tube
counterclockwise and pull it out to
remove it.
Installation of the brush
7.
Insert the brush firmly into the trigger
-
gun, and then turn it clockwise to
lock it.
To remove the brush, turn it
-
counterclockwise and pull it out of
the gun to remove it.
8. Connect the high-pressure hose to
the trigger gun
Connect the sliver end of the
-
high-pressure hose to the trigger
gun and twist the nut as indicated to
secure the connection
.