Page 2
Leggere completamente questo manuale di istruzioni prima di iniziare l’installazione del prodotto. Il simbolo evidenzia le note importanti per la sicurezza delle persone e l’integrità dell’automazione. Il simbolo richiama l’attenzione sulle note riguardanti le caratteristiche od il funzionamento del prodotto. Read this instruction manual to the letter before you begin to install the product.
Page 3
Inserto Immagini - Pictures Collection Collection de Figure - Cojunto de Imagenes Photo Kollektion - Fotoverzameling...
Page 4
min. 60 (270) min. 60 90° (270) 90° ø 32 mm...
INDEX CE DECLARATION OF CONFORMITY FOR MACHINES ......................2 WARNINGS FOR THE INSTALLER ............................2 1 DESCRIPTION AND TECHNICAL SPECIFICATIONS ......................3 2. INSTALLING THE AUTOMATED SYSTEM..........................3 2.1. PRELIMINARY CHECKS ............................3 2.2. INSTALLING THE JACK ............................. 3 2.3. INSTALLING THE HYDRAULIC CONTROL UNIT ......................4 2.4.
9) FAAC is not responsible for failure to observe Good Technique in 22) Do not allow children or adults to stay near the product while it is the construction of the closing elements to be motorised, or for any operating.
750 AUTOMATED SYSTEM 2 INSTALLING THE AUTOMATED SYSTEM The 750 system makes it possible to automate, in a virtually invisible way, leaf gates. 2.1 PRELIMINARY CHECKS The automated system consists of an underground jack that transmits movement to the leaf and a hydraulic control unit For correct operation of the automated system, the existing gate that is usually fitted on the gate post.
8) Remove and discard the control unit breather screw as The axis of the pinion must be perfectly aligned shown in fig.19. with the leaf rotation axis. 9) Top up the oil level using the references on the oil filler cap rod (fig.20). The provided FAAC HP OIL can fill a tube path To facilitate jack positioning operations, of approximately 2 metres in length. For longer paths, to a telescopic template is available as an complete filling use only FAAC HP OIL. accessory to be used as shown in fig.9.
(fig.2-ref.7). When required, top up oil using only FAAC HP OIL. It is also necessary to periodically check both the correct setting In order to not compromise correct operation of...
Page 14
Les descriptions et les illustrations du présent manuel sont fournies à titre indicatif. FAAC se réserve le droit d’apporter à tout moment les modifications qu’elle jugera utiles sur ce produit tout en conservant les caractéristiques essentielles, sans devoir pour autant mettre à...