paramondo Pergorama 4000 Installation Instructions Manual page 88

88
Mounting
Installation of the front cross beam
In the following step, the front cross brace is mounted on the rail supports. To do this, use the screws pre-installed on
the guide support.
Simply unscrew the screws for the front cross beam from the guide support with an Allen key, insert the front cross
beam and re-tighten the screws slightly.
Please note the position information given in the following figures and tighten the screws.
Awning cassette
1
2
www.paramondo.de
Right guide profile
Right guide support
Front cross beam with forward
facing screws